Aromatic phenols
These monomers are key monomers in the production of epoxy resins and polycarbonate plastic. These monomers have excellent mechanical properties.
4,4’-Dihydroxy-2,2-diphenylpropane
| Features | Typical bisphenol monomer |
| Application | Polycarbonate, epoxy resins |
| Purity % | 99 Min |
| Appearance | White crystalline powder |
| Melting point | 152-153 degrees C |
| CAS No. | 80-05-7 |
| TSCA | Have inventory |
| EINECS/ELINCS | 201-245-8 |
| ENCS | (4)-123 |
| ISHL | (4)-123 |
| Features | The monomer is low viscosity than Bisphenol-A. So that, the monomer is excellent in reactivity and handling. |
| Application | Epoxy resins |
| Purity | Mixture |
| Appearance | Pale pink or pale yellow, noodle-like solid |
| Melting point | 115-121 degrees C |
4,4’-Methylenebisphenol
[Mixture]
4,4'-Methylenebisphenol
Cas# 620-92-8
27-31wt%
| CAS No. | 620-92-8 |
| TSCA | Have inventory |
| EINECS/ELINCS | 210-658-2 |
| ENCS | (4)-90 |
| ISHL | (4)-90 |
2,4'-Methylenebisphenol
Cas# 2467-03-0
44-48wt%
| CAS No. | 2467-03-0 |
| TSCA | Have inventory |
| EINECS/ELINCS | 219-579-8 |
| ENCS | (7)-903 |
| ISHL | (7)-903 |
2,2'-Methylenebisphenol
Cas# 2467-02-9
15-18wt%
| CAS No. | 2467-02-9 |
| TSCA | Have inventory |
| EINECS/ELINCS | 219-578-2 |
| ENCS | (7)-903 |
| ISHL | (7)-903 |
Phenol formaldehyde resin
Cas# 9003-35-4
9-11wt%
| CAS No. | 9003-35-4 |
| TSCA | Have inventory |
| EINECS/ELINCS | 500-005-2 |
| ENCS | (7)-903 |
| ISHL | (7)-903 |
4,4’-(m-Phenylenediisopropyridene)diphenol
| Features | The polymer made from Bisphenol-M is excellent in mechanical properties |
| Application | Special resins |
| Purity % | 99 Min |
| Appearance | White powder |
| Melting point | 137-141 degrees C |
| CAS No. | 13595-25-0 |
| TSCA | Have inventory |
| EINECS/ELINCS | 428-970-4 |
| REACH | under the registration |
| ENCS | (4)-1582 |
| ISHL | 7-(4)-1044 |
4,4’-(p-Phenylenediisopropyridene)diphenol
| Features | The polymer made from Bisphenol-P is excellent in mechanical properties and heat resistance. |
| Application | Special resins |
| Purity % | 99 Min |
| Appearance | White powder |
| Melting point | 192-196 degrees C |
| CAS No. | 2167-51-3 |
| TSCA | NO inventory |
| EINECS/ELINCS | 606-820-0 |
| ENCS | (4)-1538 |
| ISHL | 7-(4)-791 |
4,4’-[1,4-Phenylenebis(1-methylethylydene)]bis(2,6-diemethylphenol)
| Features | The polymer made from Bisxylenol-P is excellent in mechanical properties. |
| Application | Resin reforming agent |
| Purity % | 99 Min |
| Appearance | White powder |
| Melting point | 157-163 degrees C |
| CAS No. | 36395-57-0 |
| TSCA | No inventory |
| EINECS/ELINCS | No inventory |
| ENCS | No inventory |
| ISHL | 7-(4)-840 |
2,2’-Bis(3-aryl-4-hydroxyphenyl)propane
| Features | The polymer made from BPA-CA is excellent in heat resistance, flexibility and shock resistance. |
| Application | Epoxy curing agent, resin reforming agent |
| Purity % | 95 Min |
| Appearance | Yellow or brown highly viscous liquid |
| Melting point | about 20-30 degrees C |
| CAS No. | 1745-89-7 |
| TSCA | Have inventory |
| EINECS/ELINCS | 217-121-1 |
| REACH | applied for the pre-registration |
| ENCS | (4)-1587 |
| ISHL | 7-(4)-622 |
4,4’-Sulfonylbis(2-allylphenol)
| CAS No. | 41481-66-7 |
| TSCA | Have inventory |
| ENCS | (3)-3823 |
| ISHL | 7-(10)-903 |